Author Topic: How To Install Front Wheel Bearings For A Honda Jazz 1500 The Right Way  (Read 5969 times)

peter

  • Administrator
  • Newbie
  • *****
  • Posts: 22
  • Karma: +0/-0
    • We repair and Service all makes of cars
If ever you want to install front wheel bearings for a Honda Jazz and you have the right tools to do it. Proceed with the followings tips:
1. Remove the wheel bearing from the front stub axle
2.Buy the right bearing - one with the magnetic seal for ABS -
   The car ABS will not work if you fit the wrong bearing.
3.Fit the bearing with the magnetic seal towards the sensor, The bearing side   with the magnetic seal must go in first into the stub axle, close to the sensor.
4.Make sure there is no signs of damaged to the sensor.

To determine which side of the bearing has the magnetic seal, get a small round metal ball -size about 3mm, or anything thing small. See the attached image for a example. The red arrow point to the small metal ball which is  attracted with magnetic force.

The bearing other side will not attract the metal ball.



« Last Edit: April 26, 2013, 11:45:39 AM by peter »
We repair/service all makes of cars/bakkies  http://www.petertuneup.co.za/
Auto parts Store - http://www.autopartsstore.petertuneup.co.za/

 

Visit Our Auto Parts Store
**********************
Trailer Tester